| CPU |
Intel® Celeron® J3455 quad-core 1.5 GHz processor (burst up to 2.3 GHz) |
| CPU Architecture |
64-bit x86 |
| Graphic Processors |
Intel® HD Graphics 500 |
| Floating Point Unit |
|
| Encryption Engine |
(AES-NI) |
| Hardware-accelerated Transcoding |
|
| System Memory |
8 GB SO-DIMM DDR3L (2 x 4 GB) |
| Maximum Memory |
8 GB (2 x 4 GB) |
| Memory Slot |
2 x SO-DIMM DDR3L
For dual-DIMM configuration, you must use a pair of identical DDR3L modules.
|
| Flash Memory |
4GB (Dual boot OS protection) |
| Drive Bay |
4 x 3.5-inch SATA 6Gb/s, 3Gb/s
|
| Drive Compatibility |
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives |
| Hot-swappable |
The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.
|
| M.2 SSD Slot |
2 x M.2 2280 SATA 6Gb/s SSD slots (pre-installed QM2 PCIe card)
The M.2 SSD is not included as standard.
|
| SSD Cache Acceleration Support |
|
| Gigabit Ethernet Port (RJ45) |
2 |
| 10 Gigabit Ethernet Port |
1 x 10GBASE-T (10G/5G/2.5G/1G/100M)
Pre-installed QM2 PCIe card
|
| Jumbo Frame |
|
| Thunderbolt Port |
2 (Thunderbolt™ 3) |
| PCIe Slot |
1 x PCIe Gen 2 (x2), pre-installed with a QM2 expansion card (QM2-2S10G1TB) that includes a 10GbE 10GBASE-T port and two M.2 SATA SSD slots.
The M.2 SATA SSD slots on this QM2 card only support M.2 2280 SATA 6Gb/s SSD, please check the compatibilities before purchase.
PCIe bandwidth limitations will restrict the NAS 10GbE performance.
|
| USB 3.2 Gen 1 port |
5 |
| USB 3.2 Gen 2 (10Gbps) Port |
Optional via a PCIe adapter (need to replace the pre-installed QM2 card) |
| IR Sensor |
(RM-IR004, RM-IR002, & MCE) |
| HDMI Output |
2, HDMI 1.4b (up to 3840 x 2160 @ 30Hz) |
| Audio Input |
2 x 3.5mm dynamic microphone input jacks |
| Audio Output |
1 x built-in speaker, 1 x 3.5mm line out jack (for amplifier or headphone amplifier)
You cannot use the speakers and the line-out jack simultaneously.
|
| Form Factor |
Tower |
| LED Indicators |
Power/Status, LAN, USB, HDD1-4 |
| LCD Display/ Button |
Monochrome OLED display with capacitive sensing Enter and Select buttons |
| Buttons |
Power, USB copy, Reset, Capacitive touch buttons (select, enter) |
| Dimensions (HxWxD) |
168 × 170 × 226 mm |
| Weight (Net) |
2.51 kg |
| Weight (Gross) |
4.05 kg |
| Operating temperature |
0 ~ 40?C (32?F ~ 104?F) |
| Relative Humidity |
5-95% RH non-condensing, wet bulb: 27?C (80.6?F) |
| Power Supply Unit |
120W adapter, 100-240V |
| Power Consumption: Operating Mode, Typical |
38.101 W |
| Fan |
System: 1 x 120mm |
| Sound Level |
16.1 db(A) |
| System Warning |
Buzzer |
| Kensington Security Slot |
|
| Max. Number of Concurrent Connections (CIFS) |
800 |